Send Inquiry
Silos and Tank Fabrication

Silos and Tank Fabrication

Product Details:


Price And Quantity

  • 1 , , Plant

Trade Information

  • 100 , , Plant Per Month
  • 1 Months

Product Description

As the name suggests, Storage Silos & Tanks are the storage equipments, which are used for the storage of dry items such as food grains, cement, and liquids such as chemicals, water etc. etc. Used for the long term or short term these are also known for their blending (mixing) of multiple items in which case these are named as Blending Silos. These can have a vast ambit of size opening from a few feet in diameter up to say 50 feet diameter and 100 feet or more of height. These are commonly designed and fabricated out of mild steels in surroundings as per customer demands in terms of capacity and type of material. Every single silo is specifically engineered to stand firm in environmental changes, seismic forces, wind loads etc. Welded silos of the Storage Silos' range can be made-up by utilizing leg, skirt or structural assistance.


Different international codes are followed for designing and manufacturing of silos not only from the safety point of view but also for material strength. These specifications are utilized in conjunction with the following codifications:

  • AISC - American Institute of Steel Construction
  • UBC -Uniform Building Code
  • AWS - American Welding Society
  • FDA - Food and Drug Administration
  • ASTM - American Society for Testing and Materials
  • SAE - Society of Automotive Engineers
  • OSHA - Occupational Safety and Health Administration
  • SSPC - Steel Structures Painting Council

Design Criteria

While the designing process of silos, some primary design criteria are considered like:

  • Wind factor with consolidated height, vulnerability and gust factor coefficient is also considered.
  • Seismic zone/powers factor.
  • Cooperative live, dead, and roof loads are consistently dealt out, with all manholes, nozzles and filter positions that are accordingly designed.
  • Silo designs are based on buckling posture of the body as well as on supporting construction.
  • Silos are planned to bear atmospheric pressures.
  • The discharge gates/equipments, inlets are configured on the basis of load and liquidity of the material(s).
  • There are assorted other design criteria such as kind of blending equipment (open air slides etc.), type of material, soil bearing capability on full load etc.

Manufacturing Specifications


  • When particularized, all structural welding shall adapt to WPS regulations.
  • Shell seams shall have correct incursion using grade-appropriate welding wire with automated MIG or SAW welding instrumentality.

Surface Preparation

  • All weld surfaces with distinct and sharp boundaries are ground, the undercuts are fixed, mended and re-ground. All weld spatter is abstracted and outside surfaces are grit or sand blasted as per the demand.

Coatings Carbon Steel

  • Silo exterior is glazed with minimal two rust preventive coatings that are gray or red primer (of branded manufacturer) and finishing epoxy or enamel paint in accordance with the customers requirement.

Materials Standards

Different grades of steels as per national as well as international standards are utilized for silo fabrication. All sections and plates are of proven quality from well acknowledged suppliers including European suppliers. Few of the common grades of steels utilized are-

  • Steel plates as per IS 2062 Grade A/B/C, SA 516, A36, ASTM 569 etc.
  • Functional shaped/sections as per ASTM A36
  • Functional pipes as per ASTM A53.
  • Ladders, cages, handrails, and platforms are planned to meet OSHA duties and are welded units to decrease field erection.

Rolling Capacity

Up to 100 mm Th x 3500mm L on 3 roller rolling device.

Welding Technique

Swamped metal Arc, MIG, TIG 2 mm to 8 mm electrodes.

Welder Qualification

WPS Qualified (authenticated and authorized by third party inspection agency)

Weld tests

  • Radiography
  • Ultrasonic experiment
  • Bend testing
  • 100% on weld conjuncts

Lifting Capacity

  • Elevated hook cranes up to 75 MT lifting capacity
  • 2 Bays with 75 MT, 1 bay with 25 MT

Impulsive Balancing

Up to 2500 mm diameter

Sand Blasting

Chamber size of 7000 mm x 7000 mm

Inflection Relieving

Furnace size of 4000 mm x 8000 mm

Steel Grade Used :

Some of the common grades of steels used by us are -

  • IS 2062 Grade A/B/C
  • IS 2002 Grade I/II/III Boiler Quality
  • ASME SA 516 Grade 60/65/70
  • ASTM A 516 Grade 60/65/70

Technical Specifications:

Rolling Capacity

Up to 100 mm Th x 3500mm L on 3 roller rolling machine

Welding Technique

Welding Technique Submerged metal Arc, MIG, TIG, 2 mm to 8 mm electrodes

Welder Qualification

WPS Qualified (attested and approved by third party inspection agency)

Weld tests

Radiography, Ultrasonic testing, Bend testing, 100% on weld joints

Lifting Capacity

Overhead hook cranes up to 75 MT lifting capacity, 2 Bays with 75 MT, 1 bay with 25 MT

Dynamic Balancing

Up to 2500 mm diameter

Sand Blasting

Chamber size of 7000 mm x 7000 mm

Stress Relieving

Furnace size of 4000 mm x 8000 mm

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Heavy Fabrication Works' category


D62-67, EPIP, Site-V, Kasna, Greater Noida - 201306, Uttar Pradesh, India
Phone :2341600
Send Inquiry Send SMS    Call Me Free
Mr. Gautam Khanna (Managing Director)
Mobile :08037400106
Trust Stamp